Advantech ADAM-4021 | 1-Channel Analog Output Module

Advantech ADAM-4021 | 1-Channel Analog Output Module

The ADAM-4021 is a high-reliability solution for systems requiring a single, isolated analog control loop delivered over an RS-485 serial backbone. Supporting industry-standard ranges including 4 to 20 mA and 0 to 10 V, this module is perfectly suited for driving critical field devices such as proportional valves, actuators, and motor drives. Its dual-protocol support for both Modbus RTU and ASCII commands ensures seamless integration with modern PLC architectures, SCADA platforms, and various industrial IOT gateways.

Beyond simple signal delivery, the ADAM-4021 emphasizes process safety and signal integrity through its integrated 3,000 VDC isolation barrier and low-drift circuitry. The module features an innovative output slope control mechanism, allowing users to define the rate of change for voltage or current ramps to prevent mechanical shock or process volatility. Furthermore, the built-in readback capability provides a diagnostic layer that allows the control system to verify and monitor the actual output level, ensuring high-fidelity signal execution in demanding remote environments.

REQUEST A QUOTE
SKU ADAM-4021-DE Category

Key Operational Advantages Of The ADAM-4021 Modbus Output Module

  1. Dedicated Single Loop Output For Distributed Efficiency

    • Targeted single channel design reduces total hardware costs for isolated nodes.

    • Allows for decentralized placement of control outputs closer to final field devices.

    • Ideal for adding single analog points to existing RS-485 multi-drop networks.

  2. Universal Signal Compatibility For Current And Voltage Control

    • Direct support for 4 to 20 mA and 0 to 20 mA current loop standards.

    • Provides 0 to 10 V voltage output for interfacing with drives and controllers.

    • High-resolution 16-bit performance ensures fine-grained control over the entire range.

  3. Advanced Ramping Control Through Programmable Slope Settings

    • Current slope rates are user-adjustable from 0.125 to 128 mA per second.

    • Voltage slope rates are user-adjustable from 0.0625 to 64.0 V per second.

    • Protects downstream hardware from sudden spikes or step-change transitions.

  4. Internal Signal Readback For Enhanced System Diagnostics

    • Built-in verification circuitry checks actual output values against commanded values.

    • Provides an accuracy of ±1 percent during readback for peace-of-mind operation.

    • Enables faster remote troubleshooting without the need for manual signal testing.

  5. Industrial Protocol Flexibility And Network Resilience

    • Fully compatible with Modbus RTU and legacy ASCII command sets over RS-485.

    • Integrated watchdog timer monitors system health and fails to a safe state.

    • Supports long-distance communication reaching up to 1,200 meters.

  6. Rugged Field-Ready Construction For Challenging Environments

    • Features 3,000 VDC isolation to protect against ground loops and noise.

    • Wide operating temperature range supports deployment in non-climate-controlled panels.

    • Unregulated 10 to 30 VDC power input accommodates varied industrial power supplies.

Performance Specifications For The ADAM-4021 Output Controller

Technical ParameterSpecification Detail
Part NumberADAM-4021
Communication InterfaceRS-485 (Addressable)
Networking ProtocolsModbus RTU and ASCII Command
Total Output Channels1
Current Output Support0 ~ 20 mA, 4 ~ 20 mA
Voltage Output Support0 ~ 10 V
Output Drive Accuracy±0.1% for V / ±0.2% for mA
Maximum Current Load500 ohms (Source)
Signal Resolution16-bit
Isolation Barrier3,000 VDC
Slew Rate ControlProgrammable Slope (V and mA)
Readback Accuracy±1% of full scale range
Signal Drift Stability±25 ppm/°C (Span)
Power Requirements10 to 30 VDC (Unregulated)
Total Power Draw1.4 W at 24 VDC

Recommended Deployment Scenarios For ADAM-4021 Analog Modules

The ADAM-4021 is best utilized in remote or localized control applications where a single setpoint must be maintained with high precision and isolation. Its combination of slope control and Modbus compatibility makes it a versatile tool for process engineers.

  • Precision setpoint delivery for large proportional control valves.

  • Speed control for variable frequency drives in remote pump stations.

  • Analog signal generation for industrial temperature regulators.

  • Remote chemical metering and dosing pump rate adjustment.

  • Damper control in specialized industrial HVAC and ventilation systems.

  • Integrated OEM machine control requiring a single isolated analog port.

  • Research and test lab automation requiring repeatable ramp functions.

  • Remote diagnostic systems utilizing the signal readback feature for verification.

ADAM 4021 Datasheet

Additional information

Weight2 lbs

Please submit your product enquiry

Thank you for visiting Diversified Tech.

Please fill in the form and send through your enquiry. If you are interested in multiple products then please add the details into the message section.

We look forward to receiving your enquiry.

Thank you

Diversified Technologies Team