Advantech ADAM-4510 | Industrial RS-422/485 Repeater

The ADAM-4510 is a rugged serial repeater engineered to extend communication reach and increase unit load limits across industrial automation architectures. Operating across both 2 wire RS-485 and 4 wire RS-422 interfaces on its input and output channels, the module refreshes and retransmits serial data packets to overcome cable attenuation over long distances. It incorporates intelligent automatic baud rate detection, allowing seamless communication speeds up to 115.2 kbps without requiring manual switch configuration or complex software setup.

Designed for harsh physical and electrical environments, the ADAM-4510 accepts a flexible unregulated power input ranging from 10 to 48 VDC equipped with integrated power reversal protection. Its highly efficient electronic architecture features an ultra low typical power consumption of only 0.2 W at 24 V. With a compact form factor of 102 x 60 x 27 mm, convenient plug in screw terminal blocks accepting 14 to 30 AWG wiring, and an extended operating temperature range from minus 40 to 85°C, the module provides a reliable serial extension solution for demanding factory floors, utility rooms, and outdoor enclosures.

ADAM-4510 Serial Communication Repeater Key Features

  1. Dual RS-422 And RS-485 Interface Support
    The module supports 2 wire RS-485 half duplex as well as 4 wire RS-422 full duplex signals on both its input and output interfaces, providing versatile serial network repeat capability.

  2. Automatic Baud Rate Detection
    Equipped with intelligent hardware auto detection, the repeater automatically matches serial baud rates up to 115.2 kbps without manual dip switch adjustments or software configuration.

  3. Wide Unregulated Power Supply Range
    Engineered to operate reliably from standard plant power sources, the device accepts an unregulated 10 to 48 VDC input with built in reverse power polarity protection.

  4. Ultra Low Operating Power Consumption
    The energy efficient circuit design consumes only 0.2 W typical and 0.5 W maximum at 24 V, reducing thermal output and power supply overhead in densely packed control cabinets.

  5. Extended Industrial Temperature Tolerance
    Built to endure extreme industrial environments, the module operates continuously across an ambient temperature span from minus 40 to 85°C.

  6. Convenient Removable Wiring Connectors
    Two plug in screw terminal blocks accommodate 14 to 30 AWG wiring, enabling swift field installation, routine maintenance, and simple cable replacements.

  7. Compact Form Factor For Flexible Enclosure Mounting
    Measuring just 102 x 60 x 27 mm, the lightweight and compact enclosure fits easily into distributed junction boxes, electrical cabinets, and standard industrial mounting setups.

ADAM-4510 RS-422/485 Repeater Technical Specifications

SpecificationTechnical Details
Product TypeIndustrial RS-422/485 serial communication repeater
Ordering Part NumberADAM-4510-G
Serial Input InterfaceRS-485 (2 wire) or RS-422 (4 wire)
Serial Output InterfaceRS-485 (2 wire) or RS-422 (4 wire)
Maximum Communication Speed115.2 kbps
Baud Rate ConfigurationAutomatic baud rate detection
Electrical Connectors2 x plug in screw terminal blocks
Supported Wire Gauge14 to 30 AWG (#14 to 30 AWG)
Supply VoltageUnregulated 10 to 48 VDC
Power ProtectionPower reversal protection
Typical Power Consumption0.2 W at 24 V
Maximum Power Consumption0.5 W at 24 V
Dimensions, W x H x D102 x 60 x 27 mm
Operating TemperatureMinus 40 to 85°C (-40 to 185°F)
Operating Relative Humidity95% RH at 40°C, non condensing
Non Operating Relative Humidity95% RH at 60°C, non condensing
Compliance And CertificationsCE, FCC, RoHS

ADAM-4510 Industrial Serial Repeater Suitable Applications

The ADAM-4510 is suitable for industrial environments where RS-422 or RS-485 serial communication lines exceed standard distance limitations or require additional node drops. Its automatic speed adaptation and broad operating temperature range make it an effective extension component across distributed automation topologies.

Suitable applications include:

  • Extending RS-485 communication bus distance across large manufacturing facilities

  • Increasing the maximum connected node count on industrial RS-485 multidrop networks

  • Repeating 4 wire RS-422 signals across long cable runs between controllers and machinery

  • Refreshing serial signals in building automation and HVAC management systems

  • Connecting distributed RTUs and PLCs across long haul utility corridors

  • Extending serial fieldbus cables in water and wastewater monitoring plants

  • Substation and electrical switchgear serial communication line extension

  • Power generation and solar farm serial network distribution

  • Remote automated meter reading and energy monitoring networks

  • Industrial machinery and conveyor line serial bus expansion

Additional information

Weight2 lbs

Please submit your product enquiry

Thank you for visiting Diversified Tech.

Please fill in the form and send through your enquiry. If you are interested in multiple products then please add the details into the message section.

We look forward to receiving your enquiry.

Thank you

Diversified Technologies Team