ADAM-6024 Ethernet I/O Module Features
Integrated 12 Channel Universal I/O Configuration
The ADAM-6024 combines six analog inputs, two analog outputs, two digital inputs, and two digital outputs in a single compact module. This all in one design reduces hardware requirements for applications that require both measurement and control functions.Flexible Voltage And Current Signal Acquisition
Six differential analog input channels accept ±10 VDC, 0 to 20 mA, and 4 to 20 mA input signals. This provides compatibility with widely used industrial sensors, transmitters, and process instrumentation.Two Channel Analog Output Control
Two analog output channels support 0 to 10 VDC, 0 to 20 mA, and 4 to 20 mA output ranges. These outputs can provide control signals to proportional valves, actuators, drives, and other analog controlled field equipment.Built In Analog Input To Analog Output Linear Mapping
The ADAM-6024 supports two channel analog input to analog output linear mapping across all supported input and output ranges. This feature can enable direct signal conversion and control actions without requiring a separate external controller.16 Bit Analog Measurement Resolution
The module provides 16 bit resolution for both analog inputs and analog outputs. Analog input accuracy at 25°C is specified at ±0.1% of full scale range for voltage inputs and ±0.2% of full scale range for current inputs.Digital I/O For Local Device Status And Control
Two digital inputs support dry or wet contact operation, while two sink type open collector digital outputs support loads up to 30 VDC and 100 mA per channel. These channels are suitable for monitoring switch states and controlling low current devices.Ethernet Communication For Industrial Integration
A 10/100Base T(X) Ethernet interface supports Modbus TCP, TCP/IP, UDP, and RESTful communication. D version models additionally support MQTT and SNMP for expanded connectivity with network management and IoT systems.Industrial Protection And Receiver Based Logic Support
The ADAM-6024 provides 2,000 VDC isolation protection, TVS and ESD protection, 35 VDC digital input overvoltage protection, and power reversal protection. It supports Peer to Peer and Graphic Condition Logic operation as a receiver only.
ADAM-6024 12 Channel Universal I/O Module Technical Specifications
| Specification | ADAM-6024 Technical Details |
|---|---|
| Product Type | 12 channel isolated universal Ethernet I/O module |
| Analog Input Channels | 6 differential |
| Analog Input Ranges | ±10 VDC, 0 to 20 mA, 4 to 20 mA |
| Analog Input Resolution | 16 bit |
| Analog Input Accuracy At 25°C | ±0.1% of FSR for voltage, ±0.2% of FSR for current |
| Analog Input Sampling Rate | 10, 100, or 250 samples per second total |
| Analog Input Impedance | 20 MΩ |
| Common Mode Rejection | 90 dB at 50/60 Hz |
| Normal Mode Rejection | 67 dB at 50/60 Hz |
| Analog Output Channels | 2 |
| Analog Output Types | Voltage and current |
| Analog Output Ranges | 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA |
| Analog Output Resolution | 16 bit |
| Analog Output Accuracy | ±0.1% of FSR |
| Analog Output Current Load Resistor | 500 Ω maximum |
| Analog Output Voltage Load Resistor | 1 kΩ minimum |
| Analog Input To Analog Output Linear Mapper | Supported on 2 channels |
| Digital Input Channels | 2 |
| Dry Contact Input | Logic 0 closed to GND, Logic 1 open |
| Wet Contact Input | Logic 0 from 0 to 3 VDC, Logic 1 from 10 to 30 VDC |
| Digital Output Channels | 2 |
| Digital Output Type | Sink type open collector |
| Digital Output Rating | Up to 30 VDC, 100 mA maximum load per channel |
| Ethernet Interface | 1 x RJ 45, 10/100Base T(X) |
| Communication Protocols | Modbus TCP, TCP/IP, UDP, RESTful |
| D Version Protocols | MQTT and SNMP |
| Logic Functions | Peer to Peer and Graphic Condition Logic receiver only |
| Isolation Protection | 2,000 VDC |
| Protective Features | TVS and ESD protection, digital input overvoltage protection, power reversal protection |
| Power Input | 10 to 30 VDC |
| Power Consumption | 4 W at 24 VDC |
| Watchdog Timer | 1.6 second system watchdog and programmable communication watchdog |
| Operating Temperature | -10 to 50°C, 14 to 122°F |
| D Version Operating Temperature | -40 to 70°C, -40 to 158°F |
| Operating Humidity | 20 to 95% RH, non condensing |
| Certifications | CE, FCC, UL |
| Connectors | 1 x RJ 45 Ethernet port and plug in screw terminal block |
ADAM-6024 Universal Ethernet I/O Module Applications
The ADAM-6024 is suitable for industrial control and monitoring applications that require a combination of analog measurement, analog command output, digital status monitoring, and Ethernet network communications. Its universal I/O configuration helps engineers consolidate multiple field interface functions into one compact module.
PLC and SCADA based process monitoring and control
Pressure, flow, level, and temperature transmitter acquisition
Control valve, actuator, and variable speed drive command output
Water and wastewater treatment automation
HVAC equipment monitoring and environmental control
Industrial machine automation and equipment retrofits
Chemical and material processing systems
Tank monitoring and pump control applications
Energy management and utility system instrumentation
Remote Ethernet data acquisition and control systems