ADAM-6260 Industrial Relay Output Module Features
Six Relay Outputs For Distributed Load Switching
The ADAM-6260 provides six relay output channels, including five Form C relays and one Form A relay, for remote control of compatible AC and DC loads.High Capacity AC And DC Switching Performance
Each relay supports resistive loads up to 250 VAC at 5 A or 30 VDC at 5 A. The module supports maximum switching voltages of 400 VAC and 300 VDC, with a maximum breakdown capacity of 1250 VA.Reliable Relay Timing And Endurance
Relay set and reset time is 8 ms. Mechanical endurance exceeds 15 million operations, supporting long term use in frequent switching applications.Pulse Output Capability
The ADAM-6260 supports pulse output functionality for applications requiring controlled switching sequences or timed relay operation.Daisy Chain Ethernet Connectivity
Two 10/100Base TX Ethernet ports support daisy chain network configurations. Auto bypass protection helps maintain downstream communication if an individual module loses power.Peer To Peer And Graphic Condition Logic Functions
Peer To Peer communication enables direct signal mapping between compatible I/O modules, while Graphic Condition Logic supports user defined control rules for local automation. Only one of these functions can be enabled at a time.Industrial Protection And Local Relay Status Indication
Six relay LEDs provide local status indication. The module includes 2,500 VDC isolation protection, built in TVS and ESD protection, ±35 VDC overvoltage protection, and power reversal protection.
ADAM-6260 Relay Output Module Technical Specifications
| Specification | ADAM-6260 Details |
|---|---|
| Product Type | 6 channel relay output Modbus TCP module |
| Ethernet Interface | 2 port 10/100Base TX Ethernet for daisy chain connectivity |
| Relay Output Channels | 6 |
| Relay Configuration | 5 Form C relays and 1 Form A relay |
| Contact Rating | 250 VAC at 5 A or 30 VDC at 5 A, resistive load |
| Maximum Switching Voltage | 400 VAC or 300 VDC |
| Breakdown Voltage | 500 VAC at 50 or 60 Hz |
| Maximum Breakdown Capacity | 1250 VA |
| Frequency Of Operation With Load | 360 operations per hour |
| Frequency Of Operation Without Load | 72,000 operations per hour |
| Relay Set Time | 8 ms |
| Relay Reset Time | 8 ms |
| Mechanical Endurance | More than 15 million operations |
| Isolation Between Contacts | 1000 Vrms |
| Insulation Resistance | More than 10 GΩ at 500 VDC |
| Pulse Output | Supported |
| LED Indication | 6 relay LEDs |
| Communication Protocols | Modbus TCP, TCP/IP, UDP, HTTP, DHCP, SNMP, MQTT |
| Local Control Functions | Peer To Peer and Graphic Condition Logic |
| Network Protection | Daisy chain connection with auto bypass protection |
| Isolation Protection | 2,500 VDC |
| Additional Protection | Built in TVS and ESD protection, power reversal protection, ±35 VDC overvoltage protection |
| Power Input | 10 to 30 VDC, 24 VDC standard |
| Power Consumption | 4.5 W at 24 VDC |
| Watchdog Timer | System watchdog at 1.6 seconds and programmable communication watchdog |
| Connector Type | Plug in 5 pin and 15 pin screw terminal blocks |
| Dimensions | 70 x 122 x 27 mm |
| Operating Temperature | Minus 10 to 70°C. B version: minus 40 to 70°C |
| Storage Temperature | Minus 20 to 80°C. B version: minus 40 to 80°C |
| Operating Humidity | 20 to 95% RH, non condensing |
| Storage Humidity | 0 to 95% RH, non condensing |
| Certifications | UL, CE, FCC |
ADAM-6260 Ethernet Relay Output Module Applications
The ADAM-6260 is suitable for industrial control systems requiring network connected relay switching of AC and DC loads. Its high capacity relay outputs, daisy chain Ethernet design, configurable local logic capabilities, and electrical isolation make it well suited for distributed equipment control applications.
Suitable applications include:
Pump, motor, and contactor control
Solenoid valve and actuator switching
Industrial alarm and annunciation systems
Lighting and facility control
Process equipment switching
Building automation systems
Water and wastewater treatment control
Factory automation and machine control
Remote equipment start and stop control
SCADA and Modbus TCP network integration
Distributed relay output and remote I/O systems