UID-HSR USB Interface Device, High Sample Rate Data Logging

The UID-HSR is a USB interface device that connects almost any industrial sensor to a Windows PC for monitoring and data logging. It accepts one 4-20 mA or 0-10 V analog signal and one PT100 temperature sensor, and samples at up to 1000 times per second with accuracy of ±0.15% of span.

The interface is powered from the USB port and is detected automatically by the PC software, which displays readings in any user-defined engineering unit, in graphical or tabular form, and exports to Excel or PDF. Up to 16 sensors can be managed at once. Screw terminals, three PG7 cable glands and an IP65 ABS enclosure make it suitable for the lab or the plant floor.

SKU UID-HSR Category

Key Features Of The UID-HSR USB Interface Device

  1. Connects Analog Sensors To A PC
    Accepts one 4-20 mA signal or one 0-10 V signal, single ended or differential.

  2. PT100 Temperature Input
    A second channel for a Class B PT100 sensor, 3-wire or 4-wire, powered by the interface.

  3. Up To 1000 Samples Per Second
    A user-selectable sample rate for both slow trends and fast events, with ±0.15% of span accuracy.

  4. High Resolution
    21 bits at sample rates up to 5 Hz and 16 bits from 5 Hz to 1000 Hz.

  5. USB Powered With Auto-Detection
    The interface takes its power from the USB port and is recognized automatically by the software.

  6. IP65 Enclosure With Screw Terminals
    An ABS housing with three PG7 cable glands and terminals for 26 to 14 AWG wire.

Applications For USB Sensor Interfaces

The UID-HSR is useful wherever a 4-20 mA, 0-10 V or PT100 signal needs to be viewed or recorded on a computer:

  • Laboratory testing – logging pressure, flow, level or force sensors alongside temperature.
  • Process monitoring – temporary or permanent recording of plant signals on a PC.
  • Leak testing – automated tests with reports and certificates.
  • Commissioning and fault finding – a portable way to record a transmitter signal on a laptop.
  • Sensor checking and calibration – comparing a sensor output against a reference.
  • Research and development – adding PC data logging to existing analog sensors.

How The UID-HSR Turns Any Sensor Into A USB Data Logger

Most industrial sensors output a 4-20 mA or 0-10 V signal intended for a PLC or panel meter. To record that signal on a computer you would normally need a data acquisition card, a power supply and software to scale the readings. The UID-HSR replaces these with a single USB device.

Wire the sensor to the screw terminals, connect the USB cable and the software detects the interface automatically. Readings can then be scaled to any engineering unit, so a 4-20 mA signal can be displayed as bar, psi, liters per minute or any other unit you define. The interface itself is USB powered and also powers the PT100; the connected analog sensor needs its own supply.

PC Software Features

  • Graphical and tabular data display with customizable scales
  • User-defined engineering units
  • Individual alarm levels for each sensor
  • Up to 16 sensors managed at the same time
  • Virtual differential measurement between sensors
  • Leak testing and automatic test scheduling
  • Custom certificates and customizable report templates
  • Data export to Excel and PDF

Inputs And Connections

ChannelSignalSample Rate
Analog input4-20 mA (single ended) or 0-10 VDC (single ended or differential)Up to 1000 samples per second
Temperature inputPT100 Class B, 3-wire or 4-wireUp to 5 samples per second

UID-HSR USB Interface Device Technical Specifications

SpecificationDetail
Product TypeUSB interface device for sensor data logging
Analog Input1 channel: 4-20 mA single ended, or 0-10 VDC single ended or differential
Temperature Input1 channel: PT100 Class B (IEC 60751), 3-wire or 4-wire
Accuracy±0.15% of span BFSL
Sample RateUser selectable up to 1000 samples per second; temperature 5 samples per second maximum
Resolution21 bits at ≤ 5 Hz; 16 bits from 5 Hz to 1000 Hz
InterfaceUSB 2.0, compatible with USB 3.x
Power Supply5 V from the USB port; external supply required for connected sensors
USB ConnectionUSB mini B socket with 2 m lead to USB type A
Sensor Connections3 x PG7 cable glands; screw terminals for 26 to 14 AWG wire
EnclosureABS plastic, 158 x 90 x 45 mm, six 7 mm mounting holes
Ingress ProtectionIP65
Weight300 g
Operating Temperature-20 to +80 °C (-4 to +176 °F)
Storage Temperature+5 to +40 °C (+41 to +104 °F)
Operating SystemsWindows 8, 10 and 11
Sensors Per PCUp to 16 managed simultaneously in the software

UID-HSR USB Interface Device FAQs

Which sensors can I connect to the UID-HSR?

Any sensor or transmitter with a 4-20 mA or 0-10 V output, such as pressure, level, flow, force or position sensors, plus a PT100 temperature sensor.

Does the UID-HSR power the connected sensor?

The interface is powered from the USB port and powers the PT100 temperature sensor. A 4-20 mA or 0-10 V sensor needs its own external power supply.

How many sensors can I log at once?

Each UID-HSR has one analog input and one PT100 input. The software can manage up to 16 sensors at the same time using multiple devices.

Can readings be shown in my own units?

Yes. The software scales the input signal to any user-defined engineering unit.

Please submit your product enquiry

Thank you for visiting Diversified Tech.

Please fill in the form and send through your enquiry. If you are interested in multiple products then please add the details into the message section.

We look forward to receiving your enquiry.

Thank you

Diversified Technologies Team