Reliable level measurement starts with choosing a sensor that fits your liquid, installation, and control system. Whether you’re monitoring groundwater, managing storage tanks, or measuring process liquids, the right combination of sensing technology, materials, and outputs makes a difference.
At Diversified Technologies, our newest SENSVISION additions expand the options available for continuous level monitoring. These five products offer capabilities ranging from combined water measurements and digital communication to detachable probes and precision analog transmitters.
Here’s what each brings to your application.
HLS CT310 RS: Level, Conductivity, and Temperature in One Probe
Water monitoring often requires more than knowing how deep the water is. The SENSVISION HLS CT310 RS combines hydrostatic level, conductivity, and temperature measurement in a single submersible transmitter.
Its compact 27 mm diameter supports installation in boreholes and wells, while RS 485 communication connects the measurements to compatible monitoring systems.
Key highlights:
Three measurements in one probe.
Level range options from 0.4 to 100 mH₂O.
Stated level accuracy of 0.1% of span.
Modbus RTU and HART communication.
IP68 protection with selectable cable materials.
For groundwater, mineral water, and environmental monitoring, this combined design can simplify installations that would otherwise require separate instruments.
HLS 330D RS: Digital Communication for Networked Level Monitoring
The SENSVISION HLS 330D RS brings precision hydrostatic measurement to applications using a screw-in process connection and digital communications.
It supports HART and Modbus RTU simultaneously over RS 485. Configurable addressing, baud rate, and communication settings help match the transmitter to the installed network.
Key highlights:
Nominal level ranges from 4 to 400 mH₂O.
Stated accuracy of 0.1% of span.
G 3/4 inch DIN 3852 process connection.
316L stainless steel wetted components.
Digitally compensated measurement.
Consider this model for water treatment, recycling facilities, and compatible chemical process tanks where level readings need to connect with a digital monitoring or control system.
HLS 880: A Detachable Probe for Easier Maintenance

When serviceability matters, the SENSVISION HLS 880 offers a useful advantage: its transmitter head disconnects from the cable assembly, simplifying replacement and spare-parts management.
The 35 mm diameter probe combines a PP HT plastic housing with a stainless steel sensing diaphragm for submerged measurement.
Key highlights:
Detachable probe head.
Available measuring spans from 0–1 to 0–100 mH₂O.
Standard two-wire 4–20 mA output.
Optional 0–20 mA and 0–10 V outputs.
IP68 protection with cable and seal choices.
The HLS 880 is worth considering for water storage, filtered sewage, and compatible fuel or oil applications where straightforward probe servicing is a priority.
HLS 330D: Precision Measurement with Analog Outputs

The SENSVISION HLS 330D combines digital signal compensation with an analog output for applications requiring precise hydrostatic level readings.
Its flush diaphragm and screw-in connection support compatible liquid measurement in process vessels and storage systems.
Key highlights:
Stated accuracy of ±0.1% of span.
Available measuring spans from 0–4 to 0–400 mH₂O.
Standard two-wire 4–20 mA output.
Optional three-wire 0–10 V output.
Adjustable damping, offset, and span using the required interface and software.
For precision process monitoring or laboratory installations, these configuration options help tailor measurement behavior to the application.
HLS 330: Flexible Level Measurement for Industrial Applications

The SENSVISION HLS 330 provides continuous hydrostatic level measurement in a compact stainless steel design.
Its flush sensing surface and broad range selection make it an option for many plant and machine installations.
Key highlights:
Available measuring spans from 0–1 to 0–400 mH₂O.
G 3/4 inch DIN 3852 flush process connection.
316L stainless steel wetted components.
Standard 4–20 mA output.
Optional 0–20 mA and 0–10 V outputs.
Consider the HLS 330 for industrial tanks, pumping stations, and water treatment equipment requiring a screw-in transmitter with analog connectivity.
Find the Right SENSVISION Sensor for Your Application
The best fit depends on your liquid, tank depth, operating temperature, installation requirements, and control system. Explore our full selection of level sensors, or let our team help narrow the options.
Contact our engineers to review your application requirements, recommend a suitable configuration, and provide a formal quote with lead times.
Call 585-461-2110 or email sales@diversifiedtech.net