Specializing in Industrial Automation & Data Collection Since 1984

Intelligent Motor

iMOT172S XM-CAN

Technosoft iMOT172S XM-CAN Intelligent Stepper Motor with Torque up to 300 mNm at 1200rpm, 12-48V Motor Supply, 15-36V Logic Supply, 1700 rpm at 48V Load Speed, 12-bit Magnetic Single Turn Absolute Encoder with 4096-Bits/Revolution, RS-232 Serial Interface, TMLCAN & CANopen Protocol, 5 x Digital Input, 2 x Digital Output, 1 x Analog Input and Molex Micro-Fit Connector

SKU: iMOT172S XM-CAN Category:

Features:

  • Fully digital intelligent 2 phase stepless motor with embedded motion controller, drive and absolute position feedback, offering a continuous torque up to 300 mNm at 1200rpm.
  • Motor supply: 12-48V; Logic supply 15-36V
  • No load speed of 1700 rpm at 48V
  • Two control options: stepless closed loop servo using an absolute feedback sensor; stepper open loop using microstepping and step loss detection based on the feedback sensor
  • Separate or combined logic and power supply for safety or reduced wiring requirements
  • Advanced motion control capabilities (PVT, S-curve, electronic cam)
  • Motion programming via TML (Technosoft Motion Language) or motion libraries for Visual C / VB / LabVIEW / Linux and PLC
  • Standalone operation with stored motion sequences
  • Communication: TMLCAN and CANopen (CiA 301 v4.2 and CiA 402 v3.0) protocols selectable by hardware pin
  • Digital and analogue I/Os:
  • 5 digital programmable inputs, 5-24V, PNP/NPN
  • 2 digital outputs, 24V/TTL, NPN/0.5A
  • 1 analogue input: 12 bits resolution, 0-5V
  • Feedback devices:
  • Integrated absolute position sensor offering a resolution of 4096 bits/revolution
  • Protections:
  • Over-current, over-temperature, short circuit
  • Over and undervoltage, i2t, control error
  • 16 h/w addresses selectable by hex switch
  • 2.5K × 16 SRAM for data acquisition
  • 4K × 16 E2ROM for TML motion programs and data storage