Specializing in Industrial Automation & Data Collection Since 1984

Intelligent Drive


Technosoft iPOS3602 HX-CAN Intelligent Drive with Closed Frame, 75W, 9-36V Motor Supply, 9-36V Optional Logic Supply, 2 Amps Continuous Output Current, 3.2 Amps Peak Output Current, RS-232 Serial & CAN-bus 2.0B Interface, TMLCAN and CANopen Protocol, 5 x Digital Input, 4 x Digital Output and 1 x Analog Input

SKU: iPOS3602 HX-CAN Category:


  • Motor supply: 9-36V. Optional logic supply: 9-36V
  • Output current: 2A cont. (BLDC mode); 3.2APEAK , up to 100KHz PWM
  • Digital Hall sensor interface (single-ended and open collector)
  • Incremental encoder interface (single-ended, open collector and differential)
  • Analogue sin/cos encoder interface (differential 1Vpp)
  • 5 digital inputs, 5-36V, PNP or NPN software selectable: Enable, 2 for limit switches, 2 general-purpose
  • 4 digital outputs, 5-36V, 0.5A, NPN open-collector: Ready, Error, 2 general-purpose
  • 1 analogue input: 12-bit, 0-5V: Reference or feedback or general purpose
  • RS-232 serial & CAN-bus 2.0B interfaces with H/W selectable addresses
  • TMLCAN and CANopen (CiA 301 v4.2 and CiA 402 v3.0) protocols selectable by jumper
  • 2K × 16 SRAM for data acquisition
  • 4K × 16 E2ROM to store TML motion programs and data
  • Operating ambient temperature: 0-40°C (over 40°C with derating)
  • Hardware Protections: short-circuit between motor phases and from motor phases to GND, over-voltage, under-voltage and I2t
  • Firmware: F509M+ or F524E+