Specializing in Industrial Automation & Data Collection Since 1984

Intelligent Drive

iPOS4808 MY-STO P027.314.E111

Technosoft iPOS4808 MY-STO P027.314.E111 Intelligent Drive with 400W, 11-50V Motor Supply, 9-36V Logic SELV/PELV Supply, 18-40V STO SELV/PELV Supply, 8 Amps Continuous Output Current, 20 Amps Peak Output Current, RS-232 Serial & CAN-bus 2.0B Interface, TMLCAN and CANopen Protocol, 6 x Digital Input, 5 x Digital Output and 2 x Analog Input

SKU: iPOS4808 MY-STO P027.314.E111 Category:


  • Motion controller and drive in a single compact unit based on MotionChip TM technology
  • Universal solution for control of rotary and linear brushless, brushed and 2 or 3-phase step motors
  • Advanced motion control capabilities (PVT,S-curve, electronic cam)
  • Motor supply: 11-50V; Logic SELV/ PELV supply: 9-36V; STO SELV/ PELV supply: 18-40V
  • Output current: 8A cont. (BLDC mode); 20APEAK , up to 100kHz PWM
  • Feedback Devices (dual-loop support)
  • 1st feedback devices supported:
  • Incremental encoder interface (single ended or differential) pulse & direction interface (single ended) for external (master) digital reference
  • Analogue sin/cos encoder interface (differential 1Vpp)
  • Digital Hall sensor interface (single-ended and open collector)
  • Linear Hall sensors interface
  • 2nd feedback devices supported:
  • Incremental encoder interface (differential) pulse & direction interface (differential) for external (master) digital reference
  • BISS / SSI encoder interface
  • STO: 2 safe torque-off inputs, safety integrity level (SIL3/Cat3/PLe) acc. to EN61800-5-1;-2/ EN61508-3;-4/ EN ISO 13849-1.
  • 6 digital inputs, 12-36V, PNP/NPN programmable: 2 for limit switches, 4 general-purpose
  • 5 digital outputs, 5-36V, 0.5A, NPN open-collector: Ready, Error, 3 general-purpose
  • 2 analogue inputs: 12-bit, 0-5V: Reference, Feedback or general purpose
  • RS-232 serial & CAN-bus 2.0B interfaces
  • 127 h/w addresses selectable by h/w pins configuration
  • 16k x 16 SRAM memory for data acquisition
  • 16k x16 E2ROM to store setup data, TML motion programs, cam tables and other user data
  • Operating ambient temperature: 0-40°C (over 40°C with derating)
  • NTC/PTC analogue Motor Temperature sensor input