Angle Encoder
MCS 15
RSF Electronik MCS 15 Modular Absolute Angle Encoder with <360° Measuring Range, ±15 µm/m Grating Accuracy, ≥ 75 mm Possible Shaft Diameter, DC 3.6 V to 14 V Voltage Supply, ≤ 5 µs Clock Time, ≤ 16 MHz Clock Frequency, 55 Hz to 2000 Hz Vibration, 6 ms Shock, 15-Pin D-Sub/M12 Connector, Multiple Interface Options and Utilized for Electrical Drive Position & Rotator Control
Features:
- Absolute position valuation
- Various serial interfaces
- Function display directly at the scanning head via status LED
- Easy mounting and large mounting tolerances
- Possible shaft diameter ≥ 75 mm
- Measuring range: <360°
- Accuracy of the grating (based on neutral axis): ±15 µm/m
- Graduation carrier: Steel tape scale with adhesive tape and absolute track
Related products
-
MSS 15
RSF Electronik MSS 15 Segment Incremental Modular Angle Encoder with <360° Measuring Range, 75 mm to ≤ 1000 mm Scanning Diameter, ±30 µm/m Grating Accuracy, 200 µm Grating Period, ±(60)" / D Interpolation Error, 150 m/s² (40 to 2000 Hz) Permissible Vibration, 750 m/s² (8 ms) Permissible Shock, D-Sub Connector and Utilized for Electrical Drive Position & Rotator Control
-
MCR 15
RSF Electronik MCR 15 Full Circle Absolute Modular Angle Encoder with >360° Measuring Range, ±20″, ±15″, ±10″ System Accuracy, Diameters from ≥ Ø 50.00 to 350.23 mm, DC 3.6 V to 14 V Voltage Supply, ≤ 5 µs Clock Time, ≤ 16 MHz Clock Frequency, 55 Hz to 2000 Hz Vibration, 6 ms Shock, 15-Pin D-Sub/M12 Connector, Multiple Interface Options and Utilized for Electrical Drive Position & Rotator Control
-
MSR 15
RSF Electronik MSR 15 Full Circle Incremental Modular Angle Encoder with <360° Measuring Range, ±10" System Accuracy, 50.00 mm to 350.23 mm Scanning Diameter, 30 mm to 330 mm Inside Diameter, 3960 to 37540 Lines, 150 m/s² (55 to 2000 Hz) Permissible Vibration, 750 m/s² (8 ms) Permissible Shock, 15-Pin D-Sub and Utilized for Electrical Drive Position & Rotator Control
-
MSR 45 MKS
RSF Electronik MSR 45 MKS Segment Without Integral Bearing Modular Angle Encoder with <360° Measuring Range, ≥ Ø 150 to 400 mm Pre-Bent Shaft Diameter, Over Ø 400 mm Not Pre-Bent , ±30 µm/m Grating Accuracy, 200 µm Grating Period, Refernece Mark 25 mm from Scale-Joint and Utilized for Electrical Drive Position & Rotator Control