Angle Encoder
MSR 45 MER
RSF Electronik MSR 45 MER Full Circle Without Integral Bearing Modular Angle Encoder with <360°/(linesx20)-360°/(linesx400) System Resolution, 146.99 mm-1267.44 mm Shaft Diameter, ±50"-±400" System Accuracy, 0.5µm-10µm System Resolution, ±30 µm/m Grating Accuracy, ∿ 1 Vpp/TTL Signal, 200 ns-500 ns Edge Separation, Reference Mark 25 mm from Scale Joint and Utilized for Electrical Drive Position & Rotator Control
Features:
- Full-circle version with clamping element
- Steel tape scale with elastic layer compensates Ø-change of the shaft (ΔDmax. ±0.2 mm)
- Grating pitch: 200 µm
- Easy mounting due to large mounting tolerances
- Hight rotational speed
- Integrated subdividing electronics: up to times 100
Related products
-
MSR 15
RSF Electronik MSR 15 Full Circle Incremental Modular Angle Encoder with <360° Measuring Range, ±10" System Accuracy, 50.00 mm to 350.23 mm Scanning Diameter, 30 mm to 330 mm Inside Diameter, 3960 to 37540 Lines, 150 m/s² (55 to 2000 Hz) Permissible Vibration, 750 m/s² (8 ms) Permissible Shock, 15-Pin D-Sub and Utilized for Electrical Drive Position & Rotator Control
-
MSR 45 MOR
RSF Electronik MSR 45 MOR Full Circle Without Integral Bearing Modular Angle Encoder with <360°/(linesx20)-360°/(linesx400) System Resolution, 152.70 mm-1146.54 Shaft Diameter, ±15"-±80" System Accuracy, 0.5µm-10µm System Resolution, ±30 µm/m Grating Accuracy, 200 µm Grating Period, ∿ 1 Vpp/TTL Signal, 200 ns-500 ns Edge Separation, Times 5-Times 100 Integrated Interpolation and Utilized for Electrical Drive Position & Rotator Control
-
MSR 45 MKS
RSF Electronik MSR 45 MKS Segment Without Integral Bearing Modular Angle Encoder with <360° Measuring Range, ≥ Ø 150 to 400 mm Pre-Bent Shaft Diameter, Over Ø 400 mm Not Pre-Bent , ±30 µm/m Grating Accuracy, 200 µm Grating Period, Refernece Mark 25 mm from Scale-Joint and Utilized for Electrical Drive Position & Rotator Control
-
MCS 15
RSF Electronik MCS 15 Modular Absolute Angle Encoder with <360° Measuring Range, ±15 µm/m Grating Accuracy, ≥ 75 mm Possible Shaft Diameter, DC 3.6 V to 14 V Voltage Supply, ≤ 5 µs Clock Time, ≤ 16 MHz Clock Frequency, 55 Hz to 2000 Hz Vibration, 6 ms Shock, 15-Pin D-Sub/M12 Connector, Multiple Interface Options and Utilized for Electrical Drive Position & Rotator Control