Specializing in Industrial Automation & Data Collection Since 1984

Laser Measurement (Triangulation & Distance) Sensor

optoNCDT 1420 CL1

Micro-Epsilon optoNCDT 1420 CL1 are used in Measurement Tasks Which Require Laser Class 1 Measurement Ranges 10|25|50|100|200 mm & Measuring Rate up to 4kHZ

SKU: optoNCDT 1420 CL1 Category:

optoNCDT CL1 laser sensors are used in measurement tasks which require laser class 1. With this laser class, the radiated power is at max. 390 μW, which is significantly lower than laser class 2. Used frequently in automotive production, pharmaceutical because of increased demands are being placed on manufacturers to take adequate safety precautions in their production plants, including the use of laser class 1 sensors if people are working in close proximity to laser sensors. In medical engineering, the optoNCDT 1420 CL1 sensors are used which expend only about one third of the energy of a laser class 2 sensor due to their reduced laser power of max. 390 μW. This enables measurements of even sensitive materials such as substrates without causing any chemical or thermal reaction.


  • Measuring ranges (mm)10|25|50|100|200
  • Linearity from 8µm
  • Repeatability from 0.5µm
  • Measuring rate 4kHz
  • Compact size with integrated electronics
  • 0.3m pigtail cable with M12 connector or 3m integrated sensor cable with open ends
  • Scalable analog output
  • Trigger input
  • Interfaces: RS422, PROFINET, EtherNet/IP
  • Predefined and individual presets in web interface
  • Laser class 1: radiated power max. 390µW