SENSVISION TYP-A 10 – An Equivalent to the BD Sensors OEM 17.609 G
The BD Sensors OEM 17.609 G is a stainless steel pressure transmitter developed for refrigeration and industrial pressure-monitoring applications. It features a welded stainless steel sensor and diaphragm, supports both gauge-pressure and vacuum measurement, and offers nominal pressure ranges up to 60 bar.
The SENSVISION TYP-A 10 offers equivalent welded stainless steel sensor construction, refrigeration-focused pressure and vacuum range coverage, measurement accuracy, output flexibility, and mechanical robustness as the BD Sensors OEM 17.609 G. It is therefore an ideal alternative for OEM refrigeration equipment and replacement applications.
Like the BD Sensors OEM 17.609 G, the SENSVISION TYP-A 10 uses a welded stainless steel sensor design with a welded stainless steel diaphragm and no sensor seal. This durable construction supports reliable operation in refrigeration systems exposed to pressure cycling, vibration, temperature variation, and demanding operating conditions.
The SENSVISION TYP-A 10 is available with nominal gauge-pressure ranges from 0.6 bar to 60 bar and vacuum ranges down to -1 bar, enabling dependable monitoring at compressor suction and discharge points, condensing units, refrigeration racks, and packaged cooling systems.
The SENSVISION TYP-A 10 delivers measurement accuracy of ≤ ±0.5% of span, long-term stability of ≤ ±0.3% of span per year, and a measuring rate of 1 kHz for responsive pressure feedback. It is available with standard 2-wire 4–20 mA, optional 3-wire 0–10 V, and optional 10–90% ratiometric output signals, allowing straightforward integration with a wide variety of OEM controllers and monitoring systems.
With vibration resistance up to 20 g and shock resistance up to 500 g for 1 ms, the SENSVISION TYP-A 10 is designed for equipment subject to mechanical stress and frequent load cycles. It also uses the common 7/16–20 UNF process connection, helping to support straightforward integration into refrigeration system designs.
Whether you are replacing an existing BD Sensors OEM 17.609 G or specifying a transmitter for a new refrigeration system, the SENSVISION TYP-A 10 provides a dependable, cost-effective solution without compromising accuracy, durability, or installation flexibility.
BD SensorsTM and associated part numbers (e.g., DMP 331) are trademarks or registered trademarks of BD Sensors GmbH. Diversified Technologies is an independent distributor and is not affiliated with, endorsed by, or sponsored by BD Sensors GmbH. References to BD Sensors and associated part numbers on this website are used strictly for informational, comparative, and cross-referencing purposes to assist customers in finding functional alternatives. All trademarks are the property of their respective owners.
Further Information on the TYP-A 10
The SENSVISION TYP-A 10 has been engineered to provide the same fit, form, function, and refrigeration pressure-measurement performance as the BD Sensors OEM 17.609 G, making it an ideal alternative for existing installations and new OEM refrigeration equipment.
Key Features:
Designed for OEM refrigeration and industrial cooling applications
Nominal gauge-pressure ranges from 0.6 bar to 60 bar
Vacuum measurement ranges down to -1 bar
Common 7/16–20 UNF mechanical connection
Welded stainless steel sensor construction with no sensor seal
Stainless steel 316Ti pressure port and stainless steel diaphragm
Accuracy of ≤ ±0.5% of span in accordance with EN IEC 62828-2
Long-term stability of ≤ ±0.3% of span per year
Measuring rate of 1 kHz for responsive pressure tracking
Standard 2-wire 4–20 mA output
Optional 3-wire 0–10 V output
Optional 3-wire 10–90% ratiometric output
Response time of ≤10 ms for 4–20 mA output versions
Media temperature range from -40 °C to 125 °C
Electronics and ambient temperature range from -40 °C to 85 °C
Vibration resistance up to 20 g, from 25 Hz to 2 kHz
Shock resistance up to 500 g for 1 ms
Permanent short-circuit protection on applicable output versions
Reverse-polarity protection
Selectable electrical connection options for flexible OEM integration
Designed for 100 million load cycles
Suitable for compressor suction and discharge monitoring, condensing units, packaged refrigeration systems, refrigeration racks, industrial cooling equipment, process refrigeration, and refrigeration component test stands
The SENSVISION TYP-A 10 is manufactured to deliver equivalent performance, reliability, and integration flexibility as the BD Sensors OEM 17.609 G, allowing OEMs and end users to transition confidently while maintaining accurate and stable pressure measurement in demanding refrigeration applications.