SENSVISION PTS 320D – An Equivalent to the BD Sensors DMP 333i
The BD Sensors DMP 333i is the digital version of the DMP 333 flush diaphragm pressure transmitter. Its flush welded stainless steel diaphragm creates a process connection without dead space, which suits viscous, pasty and particle-laden media that would block a conventional recessed pressure port, while intelligent digital electronics actively compensate the sensor signal for a tighter accuracy class than the standard analogue model.
The SENSVISION PTS 320D offers equivalent flush welded diaphragm construction, digital signal compensation, stainless steel wetted parts and output flexibility as the BD Sensors DMP 333i, making it an ideal alternative for both new installations and existing systems.
Like the DMP 333i, the SENSVISION PTS 320D combines a stainless steel piezoresistive sensor with digital electronics that actively compensate sensor-specific deviations including hysteresis, thermal effects and non-linearity. This gives accuracy of up to ±0.1% FSO according to IEC 61298-2 together with excellent long-term stability, rather than relying on passive compensation alone.
The SENSVISION PTS 320D covers a wide nominal pressure range from 0.4 mbar to 600 bar, is vacuum resistant, and offers overpressure and burst pressure ratings up to 1250 bar depending on the range selected. Output is configurable as a 2-wire 4–20 mA or 3-wire 0 to 10 V signal, wetted parts are stainless steel 316L, and intrinsically safe Ex ia versions are available for hazardous areas.
Whether you are replacing an existing BD Sensors DMP 333i or specifying a flush diaphragm transmitter for a new application, the SENSVISION PTS 320D provides a dependable, cost-effective solution for hygienic and industrial process measurement, including food and beverage, pharmaceutical, chemical and petrochemical duties, with a modular range of DIN 43650, Binder 723, M12x1 and cable gland connection options for straightforward installation.
BD SensorsTM and associated part numbers (e.g., DMP 333i) are trademarks or registered trademarks of BD Sensors GmbH. Diversified Technologies is an independent distributor and is not affiliated with, endorsed by, or sponsored by BD Sensors GmbH. References to BD Sensors and associated part numbers on this website are used strictly for informational, comparative, and cross-referencing purposes to assist customers in finding functional alternatives. All trademarks are the property of their respective owners.
Further Information on the PTS 320D
The SENSVISION PTS 320D has been engineered to provide the same fit, form, function, and performance as the BD Sensors DMP 333i, making it an ideal alternative for existing installations and new OEM applications.
Key Features:
Nominal pressure ranges from 0.4 mbar to 600 bar
Accuracy of up to ±0.1% FSO according to IEC 61298-2
Digital signal processing with active compensation of hysteresis, thermal effects and non-linearity
Flush welded stainless steel diaphragm for a dead-space-free process connection
Suitable for hygienic duties and for viscous, pasty and contamination-prone media
Vacuum resistant, unlimited for ranges of 1 bar and above and on request for lower ranges
Overpressure and burst pressure ratings of up to 1250 bar depending on the range selected
Configurable 2-wire 4–20 mA and 3-wire 0 to 10 V output signals
Supply voltage of 12 to 36 VDC as standard, or 14 to 28 VDC for intrinsically safe versions
Response time of approximately 5 ms on the 2-wire output and 25 ms on the 3-wire output
Medium temperature from -25 to 125 °C and electronics temperature from -25 to 85 °C
Stainless steel 1.4404 (316L) housing with a 1.4435 (316L) diaphragm
FKM seals as standard, with NBR and welded versions available
Short-circuit and reverse polarity protection
Mechanical stability of 20 g RMS vibration and 500 g / 1 ms shock
Connection options including DIN 43650, Binder 723, M12x1 and cable gland versions
Optional Ex ia intrinsically safe versions for hazardous areas
CE, ATEX, IECEx, RoHS and REACH conformity
The SENSVISION PTS 320D is manufactured to deliver equivalent performance, reliability, process compatibility, and installation flexibility as the BD Sensors DMP 333i, allowing users to transition to the SENSVISION PTS 320D with confidence while maintaining accurate, digitally compensated pressure measurement and long-term industrial durability.