Features Of The SENSVISION PTS 310D RS RS 485 Digital Pressure Transmitter
High Accuracy Digital Pressure Measurement Performance
Provides ≤ ± 0.1% span accuracy with active digital compensation for stable and repeatable measurement results.Integrated RS 485 Communication With HART And Modbus RTU
Supports digital output via RS 485 with HART protocol and Modbus RTU, enabling integration into industrial networks and control systems.Advanced 24 Bit Signal Processing Electronics
Digital electronics with 24 bit A to D conversion ensure precise signal evaluation, temperature compensation, and linearization.Comprehensive Register Mapping For System Integration
Modbus input and holding registers provide access to measured pressure, temperature, device configuration, damping, zero reset, and communication settings.Wide Pressure Range Coverage Including Vacuum Versions
Nominal ranges from 0.4 bar to 600 bar with available vacuum and compound ranges support diverse process requirements.Robust Stainless Steel Construction For Industrial Reliability
Stainless steel pressure port, housing, and diaphragm ensure durability, media compatibility, and long operational life.
Applications Of The SENSVISION PTS 310D RS Digital RS 485 Pressure Transmitter
The SENSVISION PTS 310D RS is ideal for intelligent measurement systems where digital communication, precise data acquisition, and network connectivity are required. Its combination of high accuracy sensing and configurable RS 485 communication makes it suitable for both laboratory and industrial automation environments.
- Laboratory techniques and calibration systems
- Energy production monitoring including gas consumption and thermal energy measurement
- Industrial automation with Modbus RTU networks
- SCADA and distributed control systems
- Environmental engineering including water and sewage systems
- Chemical and petrochemical process monitoring
- Digital pressure monitoring in test benches and validation systems
- Multi device RS 485 bus installations requiring configurable addressing
Technical Specifications Of The SENSVISION PTS 310D RS RS 485 Precision Pressure Transmitter
| Specification | Detail |
|---|---|
| Product Type | Precision digital pressure transmitter with RS 485 interface |
| Nominal Pressure Range | 0.4 bar to 600 bar depending on version |
| Vacuum And Compound Ranges | Available depending on configuration |
| Accuracy | ≤ ± 0.1% span according to EN IEC 62828-2 |
| Output Signal | Digital RS 485 |
| Communication Protocols | HART and Modbus RTU |
| A to D Converter | 24 bit digital conversion |
| Supply Voltage | 3.3 to 36 VDC depending on selected version |
| Thermal Error | 0.2% span in compensated range |
| Temperature Coefficient | 0.02% span per 10 K |
| Medium Temperature Range | 0 to 70 °C standard, optional -20 to +80 °C |
| Pressure Units | Configurable via Modbus and HART including bar, mbar, psi, Pa, kPa, MPa and others |
| Temperature Units | °C, °K, °F |
| Baud Rate Options | 1200, 2400, 4800, 9600, 19200, 38400 Bd |
| Parity Options | None, Even, Odd |
| Pressure Port Material | Stainless steel 1.4404 (316L) |
| Diaphragm Material | Stainless steel 1.4435 (316L) |
| Seals | FKM standard, EPDM and welded versions available |
| Electrical Connection | Binder 723 7 pin connector IP 67 |
| Mechanical Connection | G 1/2 DIN 3852 standard, others on request |
| CE Conformity | In accordance with applicable EMC requirements |