Features Of The SENSVISION PTS 330D High Accuracy Pressure Measurement Transmitter
Advanced Digital Compensation For High Precision Measurement
Integrated digital electronics continuously correct sensor deviations to ensure high accuracy performance.Welded Thinfilm Sensor Design For High Pressure Durability
The sensing element is welded to the pressure port, creating a robust and seal free construction for demanding environments.High Pressure Capability Up To 2200 Bar For Industrial Systems
Suitable for heavy duty hydraulic systems with nominal pressure ranges from 600 bar to 2200 bar.High Accuracy Performance With Minimal Drift
Delivers ≤ ±0.1% span accuracy with excellent long term stability, even under varying operating conditions.Turn Down Capability For Flexible Measurement Range Adjustment
Supports turn down up to 10 to 1, allowing adjustment of span while maintaining reliable accuracy.Optional Communication Interface For Parameter Configuration
Enables adjustment of damping, offset, and span via software and interface tools for application specific tuning.
Applications For The PTS 330D Pressure Transmitter
The SENSVISION PTS 330D is ideal for high pressure applications where precision, stability, and configurability are critical for system performance and safety.
- Hydraulic test benches and calibration systems
- High pressure hydraulic systems and power units
- Industrial plant and machine engineering
- Mobile hydraulics in commercial vehicles
- Research and development pressure measurement systems
Specifications Of The PTS 330D Precision High Pressure Pressure Transmitter
| Specification | Detail |
|---|---|
| Product Type | Precision industrial pressure transmitter for high pressure |
| Sensor Technology | Thinfilm sensor, welded |
| Pressure Type | Gauge |
| Nominal Pressure Ranges | 600, 1000, 1600, 2000, 2200 bar |
| Overpressure | 800, 1400, 2200, 2800, 2800 bar |
| Standard Output Signal | 4 to 20 mA, 2-wire |
| Optional Output | 4 to 20 mA with communication interface |
| Supply Voltage | 12 to 36 VDC |
| Accuracy | ≤ ±0.1% span (EN IEC 62828-2) |
| Turn Down Capability | Up to 10 to 1 |
| Accuracy With Turn Down | ≤ ±(0.1 + 0.015 x turn down) % span |
| Long Term Stability | ≤ ±(0.1 x turn down) % span per year |
| Response Time | Approx. 10 msec |
| Permissible Load | RE = [(Vs – Vmin) / 0.02 A] ohms |
| Influence Effects | Supply: 0.05% span per 10 V; Load: 0.05% span per k-ohm |
| Thermal Error | < 0.25% span per 10 K in compensated range minus 20 °C to 85 °C |
| Permissible Medium Temperature | minus 40 °C to 140 °C |
| Permissible Electronics Temperature | minus 25 °C to 85 °C |
| Storage Temperature | minus 40 °C to 100 °C |
| Short Circuit Protection | Permanent |
| Reverse Polarity Protection | No damage, but no function |
| EMC | According to EN 61326 |
| Vibration | 10 g RMS, 20 to 2000 Hz |
| Shock | 100 g for 11 msec |
| Pressure Port Material | Stainless steel 1.4542 (17-4 PH) |
| Housing Material | Stainless steel 1.4404 (316L) |
| Diaphragm Material | Stainless steel 1.4542 (17-4 PH) |
| Seals | None, welded construction |
| Media Wetted Parts | Pressure port and diaphragm |
| Weight | Approx. 300 g |
| Operational Life | 100 million cycles below 600 bar, 10 million cycles above 600 bar |
| Conformity | CE, EMC Directive 2014/30/EU, Pressure Equipment Directive 2014/68/EU |