DTISOCON-0-10V-IN-4-20MA-SINK-OUT Signal Converter

DTISOCON-0-10V-IN-4-20MA-SINK-OUT Signal Converter

The DTISOCON-0-10V-IN-4-20MA-SINK-OUT from Diversified Tech is a specialized configuration of the ISOCON Universal Analog Measurement And Control Signal Converter series designed for high performance voltage to current signal conditioning. This unit is factory configured to accept a 0-10V voltage input signal and convert it into a 4-20mA sink output while maintaining complete 3 port isolation between the input, output, and power supply circuits. This comprehensive isolation architecture effectively eliminates ground loops, reduces common mode noise, and protects sensitive control equipment from electrical transients and interference common in complex industrial environments. The ultra compact 12.5mm wide DIN rail design enables high density installation in control panels and marshalling cabinets where space efficiency is critical.

Built with precision signal conditioning electronics, the DTISOCON-0-10V-IN-4-20MA-SINK-OUT delivers exceptional accuracy and stability across the full operating range. The device features non interactive zero and span controls that allow for straightforward calibration without adjustment interaction, streamlining commissioning and field setup procedures. Flexible power supply options accommodate either a wide range DC supply from 12 to 36 Vdc or a universal AC supply from 90 to 264 Vac, providing compatibility with diverse industrial power environments. The sink output configuration is ideal for interfacing with control systems and devices that require current sinking capability, making this converter a comprehensive solution for interfacing voltage based control outputs with current loop equipment and sensors.

REQUEST A QUOTE
SKU DTISOCON-0-10V-IN-4-20MA-SINK-OUT Category

Features Of The DTISOCON-0-10V-IN-4-20MA-SINK-OUT Analog Signal Converter

  • Complete Three Port Isolation Architecture
    Provides full galvanic isolation between input, output, and power supply to eliminate ground loops and protect against electrical interference and noise.

  • Precision 0-10V To 4-20mA Sink Output Conversion
    Accurately converts 0-10V voltage signals into 4-20mA sink output for seamless integration with current loop control systems and loads.

  • Compact DIN Rail Mounting For Control Panels
    The slim 12.5mm wide enclosure allows for high density installation on standard TS35 DIN rails to maximize control cabinet space utilization.

  • Flexible AC Or DC Power Supply Options
    Supports a wide range of power inputs including 12 to 36 Vdc or 90 to 264 Vac to accommodate various industrial power configurations.

  • Sink Output Configuration For Control System Interfacing
    The 4-20mA sink output is specifically designed to interface with control systems and devices that require current sinking capability.

  • Non Interactive Zero And Span Adjustment Controls
    Equipped with independent calibration controls that allow for quick and precise adjustment without interaction between the zero and span settings.

  • High Accuracy And Low Temperature Drift Performance
    Delivers typical linearity error of ±0.01 percent with low temperature coefficient of ±50ppm per °C for consistent signal integrity.

  • Selectable Response Time For Process Optimization
    Offers user selectable fast or normal response times of 25ms or 60ms to match the specific dynamics of the application.

Technical Specifications DTISOCON-0-10V-IN-4-20MA-SINK-OUT

ParameterSpecification
Part NumberDTISOCON-0-10V-IN-4-20MA-SINK-OUT
Input Signal Type0-10V Voltage
Input Impedance1 MΩ Typical
Output Signal Type4-20mA Current Sink
Output Load ResistanceUp To 750 Ω
Output Linearity Error±0.01 Percent Typical / ±0.05 Percent Maximum
Temperature Coefficient±50 ppm Per °C Maximum
Load Resistance Error±5 ppm Per Ω (0 < R < 750 Ω)
Response Time (10-90 Percent)25ms (Fast) / 60ms (Normal) Selectable
Power Supply (DC Version)12 To 36 Vdc
Power Supply (AC Version)90 To 264 Vac
Supply Current (24V DC)45 mA Typical / 85 mA Maximum
Isolation Voltage1 kV Continuous
Surge Voltage Protection2.5 kV For 50µs / 10 kV Per µs Transient
Operating Temperature0°C To 55°C
Relative Humidity0 Percent To 90 Percent Non Condensing
Mounting TypeDIN Rail TS35
Enclosure Dimensions12.5mm Wide x 114.5mm High x 99mm Deep
Connection TypeScrew Clamp With Pressure Plate
Conductor Size Range0.5mm² To 4.0mm²
WeightApproximately 95g
Download the Specification Sheet Here

Applications For The DTISOCON-0-10V-IN-4-20MA-SINK-OUT Signal Converter

The DTISOCON-0-10V-IN-4-20MA-SINK-OUT is designed for applications where 0-10V control signals must be converted to isolated 4-20mA sink output signals for control system operation and monitoring. By providing 3 port isolation and high accuracy voltage to current conversion, the unit protects control equipment from ground potential differences, electrical noise, and wiring issues common in industrial environments. Its compact DIN rail format, wide power supply range, and sink output capability make it well suited to both new installations and retrofit projects across many industrial sectors.

Suitable applications include:

  • Interfacing PLC and DCS 0-10V analog outputs with 4-20mA control systems requiring sink input capability
  • Ground loop elimination in control signal circuits between control systems and field equipment
  • Signal conditioning for SCADA systems requiring voltage to current sink conversion
  • Isolation of control signals in water and wastewater treatment automation systems
  • Voltage to current sink interface for building management and HVAC control systems
  • Protection of control instrumentation in power generation and distribution facilities
  • Signal conversion in chemical and pharmaceutical manufacturing control systems
  • High density signal marshalling in oil and gas production control rooms
  • Environmental monitoring systems requiring isolated voltage to current sink interfacing
  • Industrial machinery and automation control requiring compact isolated converters
  • Test and measurement setups where voltage outputs must drive current sink instruments
  • Remote telemetry and data acquisition station signal conditioning

Additional information

Weight1 lbs

Please submit your product enquiry

Thank you for visiting Diversified Tech.

Please fill in the form and send through your enquiry. If you are interested in multiple products then please add the details into the message section.

We look forward to receiving your enquiry.

Thank you

Diversified Technologies Team