DTISOCON-1-5V-IN-0-20MA-SOURCE-OUT Signal Converter

DTISOCON-1-5V-IN-0-20MA-SOURCE-OUT Signal Converter

The DTISOCON-1-5V-IN-0-20MA-SOURCE-OUT from Diversified Tech is a specialized configuration of the ISOCON Universal Analog Measurement And Control Signal Converter series designed for high performance voltage to current signal conditioning. This unit is factory configured to accept a 1-5V voltage input and convert it into a 0-20mA source output while maintaining complete 3 port isolation between the input, output, and power supply circuits. This comprehensive isolation architecture effectively eliminates ground loops, reduces common mode noise, and protects sensitive control equipment from electrical transients and interference common in complex industrial environments. The ultra compact 12.5mm wide DIN rail design enables high density installation in control panels and marshalling cabinets where space efficiency is critical.

Built with precision signal conditioning electronics, the DTISOCON-1-5V-IN-0-20MA-SOURCE-OUT delivers exceptional accuracy and stability across the full operating range. The device features non interactive zero and span controls that allow for straightforward calibration without adjustment interaction, streamlining commissioning and field setup procedures. Flexible power supply options accommodate either a wide range DC supply from 12 to 36 Vdc or a universal AC supply from 90 to 264 Vac, providing compatibility with diverse industrial power environments. The source output configuration is ideal for driving field devices and control system inputs that require an active current signal, making this converter a comprehensive solution for interfacing voltage based control signals with standard 0-20mA loop equipment and sensors.

REQUEST A QUOTE
SKU DTISOCON-1-5V-IN-0-20MA-SOURCE-OUT Category

Features Of The DTISOCON-1-5V-IN-0-20MA-SOURCE-OUT Analog Signal Converter

  1. Complete Three Port Isolation Architecture
    Provides full galvanic isolation between input, output, and power supply to eliminate ground loops and protect against electrical interference and noise.

  2. Precision 1-5V To 0-20mA Source Output Conversion
    Accurately converts 1-5V voltage signals into a stable 0-20mA source output for seamless integration with industrial current loop systems.

  3. Compact DIN Rail Mounting For Control Panels
    The slim 12.5mm wide enclosure allows for high density installation on standard TS35 DIN rails to maximize control cabinet space utilization.

  4. Flexible AC Or DC Power Supply Options
    Supports a wide range of power inputs including 12 to 36 Vdc or 90 to 264 Vac to accommodate various industrial power configurations.

  5. Integrated Isolated Transmitter Power Supply
    Features a built in isolated supply capable of powering standard field transmitters and devices directly from the converter.

  6. Non Interactive Zero And Span Adjustment Controls
    Equipped with independent calibration controls that allow for quick and precise adjustment without interaction between the zero and span settings.

  7. High Accuracy And Low Temperature Drift Performance
    Delivers typical linearity error of ±0.01 percent with low temperature coefficient of ±50ppm per °C for consistent signal integrity.

  8. Selectable Response Time For Process Optimization
    Offers user selectable fast or normal response times of 25ms or 60ms to match the specific dynamics of the application.

DTISOCON-1-5V-IN-0-20MA-SOURCE-OUT Technical Specifications

ParameterSpecification
Part NumberDTISOCON-1-5V-IN-0-20MA-SOURCE-OUT
Input Signal Type1-5V Voltage
Input Impedance1 MΩ Typical
Output Signal Type0-20mA Current Source
Output Load ResistanceUp To 750 Ω
Output Linearity Error±0.01 Percent Typical / ±0.05 Percent Maximum
Temperature Coefficient±50 ppm Per °C Maximum
Load Resistance Error±5 ppm Per Ω (0 < R < 750 Ω)
Response Time (10-90 Percent)25ms (Fast) / 60ms (Normal) Selectable
Power Supply (DC Version)12 To 36 Vdc
Power Supply (AC Version)90 To 264 Vac
Supply Current (24V DC)45 mA Typical / 85 mA Maximum
Isolation Voltage1 kV Continuous
Surge Voltage Protection2.5 kV For 50µs / 10 kV Per µs Transient
Operating Temperature0°C To 55°C
Relative Humidity0 Percent To 90 Percent Non Condensing
Mounting TypeDIN Rail TS35
Enclosure Dimensions12.5mm Wide x 114.5mm High x 99mm Deep
Connection TypeScrew Clamp With Pressure Plate
Conductor Size Range0.5mm² To 4.0mm²
WeightApproximately 95g
Download the Specification Sheet Here

Applications For The DTISOCON-1-5V-IN-0-20MA-SOURCE-OUT Signal Converter

The DTISOCON-1-5V-IN-0-20MA-SOURCE-OUT is designed for applications where 1-5V voltage signals must be converted to isolated 0-20mA current loop signals for field device operation and control. By providing 3 port isolation and high accuracy voltage to current conversion, the unit protects field equipment from ground potential differences, electrical noise, and wiring issues common in industrial environments. Its compact DIN rail format, wide power supply range, and integrated transmitter power make it well suited to both new installations and retrofit projects across many industrial sectors.

Suitable applications include:

  • Interfacing PLC and DCS 1-5V analog outputs with 0-20mA field transmitters and actuators
  • Ground loop elimination in current loop circuits between control systems and field devices
  • Signal conditioning for SCADA systems requiring voltage to current conversion
  • Isolation of measurement signals in water and wastewater treatment automation
  • Voltage to current interface for building management and HVAC control systems
  • Protection of field instrumentation in power generation and distribution facilities
  • Signal conversion in chemical and pharmaceutical manufacturing control systems
  • High density signal marshalling in oil and gas production control rooms
  • Environmental monitoring systems requiring isolated voltage to current interfacing
  • Industrial machinery and automation control requiring compact isolated converters
  • Test and measurement setups where voltage outputs must drive standard 0-20mA instruments
  • Remote telemetry and data acquisition station signal conditioning

Additional information

Weight1 lbs

Please submit your product enquiry

Thank you for visiting Diversified Tech.

Please fill in the form and send through your enquiry. If you are interested in multiple products then please add the details into the message section.

We look forward to receiving your enquiry.

Thank you

Diversified Technologies Team