Key Features Of The DTISOCON-4-20MA-IN-1-5V-SOURCE-OUT Analog Signal Converter
Full Three Port Electrical Isolation
Provides complete galvanic isolation between the input, output, and power supply circuits to eliminate ground loops and protect against electrical interference.Precision 4-20mA To 1-5V Signal Conversion
Accurately converts standard 4-20mA current loop signals into a 1-5V source output for seamless integration with voltage based control systems.Ultra Slim DIN Rail Enclosure Design
The compact 12.5mm wide housing allows for high density mounting on standard TS35 DIN rails to maximize space efficiency in control panels.Universal AC Or DC Power Supply Compatibility
Supports a wide range of power inputs including 12 to 36 Vdc or 90 to 264 Vac to accommodate various industrial power environments.Integrated Isolated Transmitter Power Supply
Features a built in isolated supply capable of powering standard 2 wire 4-20mA transmitters directly from the converter module.Non Interactive Zero And Span Calibration
Equipped with independent adjustment controls that allow for quick and easy calibration without interaction between the zero and span settings.High Accuracy And Low Thermal Drift
Delivers a typical linearity error of only ±0.01 percent and a low temperature coefficient to ensure signal integrity across varying conditions.Selectable Signal Response Times
Offers user selectable fast or normal response times of 25ms or 60ms to match the specific dynamics of the process being monitored.
DTISOCON-4-20MA-IN-1-5V-SOURCE-OUT Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | DTISOCON-4-20MA-IN-1-5V-SOURCE-OUT |
| Input Signal Type | 4-20mA Current |
| Input Impedance | 15 Ω Typical |
| Voltage Drop At Input | 0.3 V At 20mA |
| Output Signal Type | 1-5V Voltage Source |
| Output Load Impedance | Minimum 100 kΩ |
| Output Linearity Error | ±0.01 Percent Typical / ±0.05 Percent Maximum |
| Temperature Coefficient | ±50 ppm Per °C Maximum |
| Load Resistance Error | ±5 ppm Per Ω (0 < R < 750 Ω) |
| Response Time (10-90 Percent) | 25ms (Fast) / 60ms (Normal) Selectable |
| Power Supply (DC Version) | 12 To 36 Vdc |
| Power Supply (AC Version) | 90 To 264 Vac |
| Supply Current (24V DC) | 45 mA Typical / 85 mA Maximum |
| Isolation Voltage | 1 kV Continuous |
| Surge Voltage Protection | 2.5 kV For 50µs / 10 kV Per µs Transient |
| Operating Temperature | 0°C To 55°C |
| Relative Humidity | 0 Percent To 90 Percent Non Condensing |
| Mounting Type | DIN Rail TS35 |
| Enclosure Dimensions | 12.5mm Wide x 114.5mm High x 99mm Deep |
| Connection Type | Screw Clamp With Pressure Plate |
Suitable Applications For The DTISOCON-4-20MA-IN-1-5V-SOURCE-OUT Signal Converter
The DTISOCON-4-20MA-IN-1-5V-SOURCE-OUT is an essential component for industrial applications requiring the conversion of 4-20mA current signals into isolated 1-5V voltage signals. Its robust 3 port isolation makes it ideal for protecting sensitive PLC and DCS analog inputs from ground potential differences and electrical noise found in heavy industrial environments. The integrated transmitter power and compact design simplify the installation of field sensors in both new builds and system upgrades across a wide variety of sectors.
Suitable applications include:
- Interfacing 4-20mA field transmitters with 1-5V PLC or DCS analog inputs
- Ground loop elimination in process control and automation circuits
- Signal conditioning for SCADA and data acquisition systems
- Isolation of measurement signals in water and wastewater treatment plants
- Current to voltage conversion for building management and HVAC systems
- Protection of sensitive instrumentation in power generation facilities
- Signal interfacing in chemical and pharmaceutical manufacturing
- High density signal marshalling in oil and gas control rooms
- Environmental monitoring and remote telemetry station signal conditioning
- Laboratory and test bench measurement signal isolation