Advantech ADAM-5013 | 3-Ch RTD Input Module

Advantech ADAM-5013 | 3-Ch RTD Input Module

The ADAM-5013 is a precision thermal acquisition module engineered to provide accurate temperature data directly to industrial automation controllers. This module supports three independent RTD input channels and is compatible with industry standard Pt100 and Nickel RTD sensors across a wide variety of temperature ranges. With its 16 bit resolution and high common mode rejection, the ADAM-5013 ensures that even the smallest temperature fluctuations are captured with clinical precision while maintaining signal integrity in electrically noisy environments.

Built for flexibility in the field, the ADAM-5013 supports 2, 3, or 4 wire RTD connections, allowing it to compensate for lead wire resistance and deliver the most accurate readings possible regardless of cable length. The module is housed in a rugged ABS plus PC enclosure and features 3000 VDC isolation voltage to protect the core control system from high voltage transients. Whether integrated into an ADAM-5000 series chassis for factory automation or used in a remote monitoring site, the ADAM-5013 provides a reliable and cost effective solution for high performance temperature measurement.

REQUEST A QUOTE
SKU ADAM-5013-A2E Category

ADAM-5013 RTD Module Features For High Performance Thermal Sensing

  1. Three Independent High Resolution RTD Input Channels

    • The ADAM-5013 provides 3 dedicated channels for RTD sensor interfacing.
    • Each channel utilizes 16 bit resolution for highly detailed temperature data acquisition.
    • This configuration allows for multi point temperature monitoring within a single automation slot.

  2. Versatile Support For Platinum And Nickel RTD Sensors

    • The module is compatible with IEC and JIS standard Pt100 RTD sensors.
    • It also supports Ni RTD sensor types for broader industrial compatibility.
    • Wide temperature ranges from -100°C to +600°C for Pt100 and -80°C to +100°C for Ni are supported.

  3. Multi Wire Input Connections For Enhanced Accuracy

    • The module natively supports 2, 3, and 4 wire input connection schemes.
    • 3 and 4 wire modes effectively eliminate errors caused by lead wire resistance over long distances.
    • This feature ensures that the temperature reading at the controller matches the actual sensor state.

  4. Excellent Signal Integrity And Noise Rejection

    • Common Mode Rejection (CMR) is rated at an impressive 150 dB at 50/60 Hz.
    • Normal Mode Rejection (NMR) is rated at 100 dB for superior signal stability.
    • These specifications allow the module to operate reliably near high power industrial machinery.

  5. Integrated High Voltage Isolation For System Protection

    • The ADAM-5013 features internal isolation voltage protection of 3000 VDC.
    • This safeguard prevents field side electrical faults from damaging the main controller or network.
    • It significantly increases the overall reliability and safety of the distributed control system.

  6. Rugged Industrial Construction And Low Power Usage

    • The module is constructed with a durable ABS plus PC enclosure.
    • Maximum power consumption is kept exceptionally low at only 1.1 W.
    • It utilizes a convenient plug in screw terminal for secure field wiring between #14 and 22 AWG.

ADAM-5013 Technical Specifications For RTD Temperature Measurement

SpecificationDetails
Product ModelADAM-5013
Product Type3-ch RTD Input Module
Input Channels3
RTD Types SupportedPt100 (IEC and JIS), Ni RTD
Input Connections2, 3, or 4 wire
Resolution16-bit
Accuracy±0.1% or better
Pt100 Range (IEC/JIS)-100 to +600°C (multiple spans)
Ni RTD Range-80 to +100°C
Signal Isolation3,000 VDC
CMR @ 50/60 Hz150 dB
NMR @ 50/60 Hz100 dB
Sampling Rate10 samples/sec (total)
Input Impedance2 MΩ
Span Drift±0.01°C/°C
Zero Drift±0.015°C/°C
Power Consumption1.1 W maximum
Enclosure MaterialABS+PC
CertificationCE

Suitable Applications For ADAM-5013 RTD Input Modules

The ADAM-5013 is specifically designed for industrial processes that demand precise and stable temperature monitoring. Its ability to handle multiple RTD types and 4 wire connections makes it an ideal fit for critical thermal control applications in diverse factory and facility environments.

  • Precise process temperature control in chemical plants
  • Food and beverage pasteurization and storage monitoring
  • HVAC system thermal logging and performance tracking
  • Clean room and laboratory environmental monitoring
  • Cold chain and refrigeration temperature management
  • Industrial furnace and oven temperature monitoring
  • Plastic injection molding and extrusion thermal control
  • Pharmaceutical manufacturing environmental validation
  • Remote weather and site temperature monitoring stations
  • Thermal tracking for high power industrial equipment and motors
ADAM 5013 Datasheet

Additional information

Weight2 lbs

Please submit your product enquiry

Thank you for visiting Diversified Tech.

Please fill in the form and send through your enquiry. If you are interested in multiple products then please add the details into the message section.

We look forward to receiving your enquiry.

Thank you

Diversified Technologies Team