Angle Encoders
Modular Angle Encoders are available with or without integral bearings. This establishes the connection between the mechanism and the control electronics. In automation, they are used both for recording angle and position, while also for determining speed and acceleration values. Modular Angle Encoders are required to convert the recorded value of a mechanical variable into electrical signals so that they can be evaluated by output devices, PLCs and industrial PCs.
Showing all 7 results
-
MCR 15
RSF Electronik MCR 15 Full Circle Absolute Modular Angle Encoder with >360° Measuring Range, ±20″, ±15″, ±10″ System Accuracy, Diameters from ≥ Ø 50.00 to 350.23 mm, DC 3.6 V to 14 V Voltage Supply, ≤ 5 µs Clock Time, ≤ 16 MHz Clock Frequency, 55 Hz to 2000 Hz Vibration, 6 ms Shock, 15-Pin D-Sub/M12 Connector, Multiple Interface Options and Utilized for Electrical Drive Position & Rotator Control
-
MCS 15
RSF Electronik MCS 15 Modular Absolute Angle Encoder with <360° Measuring Range, ±15 µm/m Grating Accuracy, ≥ 75 mm Possible Shaft Diameter, DC 3.6 V to 14 V Voltage Supply, ≤ 5 µs Clock Time, ≤ 16 MHz Clock Frequency, 55 Hz to 2000 Hz Vibration, 6 ms Shock, 15-Pin D-Sub/M12 Connector, Multiple Interface Options and Utilized for Electrical Drive Position & Rotator Control
-
MSR 15
RSF Electronik MSR 15 Full Circle Incremental Modular Angle Encoder with <360° Measuring Range, ±10" System Accuracy, 50.00 mm to 350.23 mm Scanning Diameter, 30 mm to 330 mm Inside Diameter, 3960 to 37540 Lines, 150 m/s² (55 to 2000 Hz) Permissible Vibration, 750 m/s² (8 ms) Permissible Shock, 15-Pin D-Sub and Utilized for Electrical Drive Position & Rotator Control
-
MSR 45 MER
RSF Electronik MSR 45 MER Full Circle Without Integral Bearing Modular Angle Encoder with <360°/(linesx20)-360°/(linesx400) System Resolution, 146.99 mm-1267.44 mm Shaft Diameter, ±50"-±400" System Accuracy, 0.5µm-10µm System Resolution, ±30 µm/m Grating Accuracy, ∿ 1 Vpp/TTL Signal, 200 ns-500 ns Edge Separation, Reference Mark 25 mm from Scale Joint and Utilized for Electrical Drive Position & Rotator Control
-
MSR 45 MKS
RSF Electronik MSR 45 MKS Segment Without Integral Bearing Modular Angle Encoder with <360° Measuring Range, ≥ Ø 150 to 400 mm Pre-Bent Shaft Diameter, Over Ø 400 mm Not Pre-Bent , ±30 µm/m Grating Accuracy, 200 µm Grating Period, Refernece Mark 25 mm from Scale-Joint and Utilized for Electrical Drive Position & Rotator Control
-
MSR 45 MOR
RSF Electronik MSR 45 MOR Full Circle Without Integral Bearing Modular Angle Encoder with <360°/(linesx20)-360°/(linesx400) System Resolution, 152.70 mm-1146.54 Shaft Diameter, ±15"-±80" System Accuracy, 0.5µm-10µm System Resolution, ±30 µm/m Grating Accuracy, 200 µm Grating Period, ∿ 1 Vpp/TTL Signal, 200 ns-500 ns Edge Separation, Times 5-Times 100 Integrated Interpolation and Utilized for Electrical Drive Position & Rotator Control
-
MSS 15
RSF Electronik MSS 15 Segment Incremental Modular Angle Encoder with <360° Measuring Range, 75 mm to ≤ 1000 mm Scanning Diameter, ±30 µm/m Grating Accuracy, 200 µm Grating Period, ±(60)" / D Interpolation Error, 150 m/s² (40 to 2000 Hz) Permissible Vibration, 750 m/s² (8 ms) Permissible Shock, D-Sub Connector and Utilized for Electrical Drive Position & Rotator Control